dmesg - Intel Core i5 520M
microcode: microcode updated early to revision 0x11, date = 2018-05-08
Linux version 5.4.0-47-generic (buildd@lcy01-amd64-014) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 (Ubuntu 5.4.0-47.51-generic 5.4.55)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b7680fff] usable
BIOS-e820: [mem 0x00000000b7681000-0x00000000b76befff] reserved
BIOS-e820: [mem 0x00000000b76bf000-0x00000000b7757fff] usable
BIOS-e820: [mem 0x00000000b7758000-0x00000000b77befff] ACPI NVS
BIOS-e820: [mem 0x00000000b77bf000-0x00000000b77e0fff] usable
BIOS-e820: [mem 0x00000000b77e1000-0x00000000b77fefff] ACPI data
BIOS-e820: [mem 0x00000000b77ff000-0x00000000b77fffff] usable
BIOS-e820: [mem 0x00000000b7800000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 20042 /Base Board Product Name, BIOS 29CN39WW(V2.16) 02/24/2011
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.957 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0xb7800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE00000 mask FFFE00000 write-protect
2 base 080000000 mask FC0000000 write-back
3 base 0B8000000 mask FF8000000 uncachable
4 base 0B7800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
check: Scanning 1 areas for low memory corruption
RAMDISK: [mem 0x2e4e7000-0x3326afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000B77FE120 00008C (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x00000000B77FC000 0000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: DSDT 0x00000000B77EE000 00AE39 (v02 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: FACS 0x00000000B776A000 000040
ACPI: FACS 0x00000000B776A000 000040
ACPI: ASF! 0x00000000B77FD000 0000A5 (v32 INTEL Calpella 00000001 MSFT 01000013)
ACPI: HPET 0x00000000B77FB000 000038 (v01 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: APIC 0x00000000B77FA000 00008C (v02 INTEL Calpella 00000001 MSFT 01000013)
ACPI: MCFG 0x00000000B77F9000 00003C (v01 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: SLIX 0x00000000B77ED000 000176 (v01 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: BOOT 0x00000000B77EA000 000028 (v01 INTEL Calpella 00000001 MSFT 01000013)
ACPI: ASPT 0x00000000B77E6000 000034 (v04 INTEL Calpella 00000001 MSFT 01000013)
ACPI: WDRT 0x00000000B77E5000 000047 (v01 INTEL Calpella 00000000 MSFT 01000013)
ACPI: DMAR 0x00000000B77E4000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 0x00000000B77E3000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0x00000000B77E2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: SSDT 0x00000000B77E1000 00049F (v01 PmRef ApTst 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000b77fffff]
NODE_DATA(0) allocated [mem 0xb772d000-0xb7757fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000b77fffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000b7680fff]
node 0: [mem 0x00000000b76bf000-0x00000000b7757fff]
node 0: [mem 0x00000000b77bf000-0x00000000b77e0fff]
node 0: [mem 0x00000000b77ff000-0x00000000b77fffff]
Zeroed struct page in unavailable ranges: 2343 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000000b77fffff]
On node 0 totalpages: 751321
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11680 pages used for memmap
DMA32 zone: 747325 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xba000000-0xbbffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb7681000-0xb76befff]
PM: Registered nosave memory: [mem 0xb7758000-0xb77befff]
PM: Registered nosave memory: [mem 0xb77e1000-0xb77fefff]
[mem 0xbc000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 739556
Policy zone: DMA32
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2837796K/3005284K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 167488K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44505 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
DMAR: DRHD base: 0x000000fed91000 flags: 0x0
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
DMAR: DRHD base: 0x000000fed93000 flags: 0x1
DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
DMAR: RMRR base: 0x000000b5b2e000 end: 0x000000b5b4efff
DMAR: RMRR base: 0x000000b9e00000 end: 0x000000bbffffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2281eade429, max_idle_ns: 440795307815 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.91 BogoMIPS (lpj=9575828)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x2)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See for more details.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (19151.65 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb7758000-0xb77befff] (421888 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 18:24:22, date: 2020-09-23
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1600885462.144:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FCA73214400 0003E2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FCA73040000 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FCA731ABC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FCA7314CC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 17 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd8406100-0xd840610f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd8405c00-0xd8405fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd8400000-0xd8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd8405800-0xd8405bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd8405000-0xd84057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd8406000-0xd84060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xd8404000-0xd8404fff 64bit]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01-04]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xd7400000-0xd83fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:05:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xd6400000-0xd6403fff 64bit]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd6400000-0xd73fffff]
pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:06:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:06:00.0: reg 0x18: [mem 0xd2410000-0xd2410fff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xd2400000-0xd240ffff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xd5400000-0xd63fffff]
pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.4: PCI bridge to [bus 07-0a]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd4400000-0xd53fffff]
pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
pci_bus 0000:0b: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb7681000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7758000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb77e1000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs SYN0728 SYN0700 SYN0002 PNP0f13 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0xbc000000-0xbc000fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:06:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01-04]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xd7400000-0xd83fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd6400000-0xd73fffff]
pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xd5400000-0xd541ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xd5400000-0xd63fffff]
pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 07-0a]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd4400000-0xd53fffff]
pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbc000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd7400000-0xd83fffff]
pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xd6400000-0xd73fffff]
pci_bus 0000:05: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd5400000-0xd63fffff]
pci_bus 0000:06: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xd4400000-0xd53fffff]
pci_bus 0000:07: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0b: resource 7 [mem 0xbc000000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 19056 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 19493 usecs
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 79376K
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd8405c00
battery: ACPI: Battery Slot [BAT1] (battery present)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-47-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
tsc: Refined TSC clocksource calibration: 2393.999 MHz
hub 1-0:1.0: 3 ports detected
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
ehci-pci 0000:00:1d.0: EHCI Host Controller
clocksource: Switched to clocksource tsc
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
usb 1-1: new high-speed USB device number 2 using ehci-pci
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd8405800
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
hub 1-1:1.0: USB hub found
usb usb2: Manufacturer: Linux 5.4.0-47-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS2] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usb 2-1: new high-speed USB device number 2 using ehci-pci
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
platform eisa.0: Probing EISA bus 0
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
hub 2-1:1.0: USB hub found
ledtrig-cpu: registered to indicate activity on CPUs
hub 2-1:1.0: 8 ports detected
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
microcode: sig=0x20652, pf=0x10, revision=0x11
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (5523115804, 458589)->(5688866712, -165292319)
usb 2-1.1: New USB device found, idVendor=0bc2, idProduct=ab24, bcdDevice= 1.00
usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1.1: Product: BUP Slim RD
registered taskstats version 1
usb 2-1.1: Manufacturer: Seagate
usb 2-1.1: SerialNumber: NA7WMVHH
Loading compiled-in X.509 certificates
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
usb 2-1.2: New USB device found, idVendor=0603, idProduct=8612, bcdDevice= 0.10
Key type big_key registered
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: J1455
Key type encrypted registered
usb 2-1.2: Manufacturer: NOVATEK
AppArmor: AppArmor sha1 policy hashing enabled
usb 2-1.3: new high-speed USB device number 5 using ehci-pci
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
usb 2-1.3: New USB device found, idVendor=090c, idProduct=37b3, bcdDevice=10.21
evm: Initialising EVM extended attributes:
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Lenovo EasyCamera
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:33:444
usb 2-1.3: Manufacturer: Image Processor
usb 2-1.3: SerialNumber: Integrated Camera
usb 2-1.6: new high-speed USB device number 6 using ehci-pci
rtc_cmos 00:01: setting system clock to 2020-09-23T18:24:29 UTC (1600885469)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0158, bcdDevice=58.88
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: USB2.0-CRW
usb 2-1.6: Manufacturer: Generic
usb 2-1.6: SerialNumber: 20071114173400000
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
bcma-pci-bridge 0000:05:00.0: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma-pci-bridge 0000:05:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
bcma-pci-bridge 0000:05:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
bcma-pci-bridge 0000:05:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
random: fast init done
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
bcma-pci-bridge 0000:05:00.0: bus0: Bus registered
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usbcore: registered new interface driver usb-storage
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
cryptd: max_cpu_qlen set to 1000
libphy: r8169: probed
r8169 0000:06:00.0 eth0: RTL8102e/RTL8103e, b8:70:f4:0b:41:bb, XID 24e, IRQ 18
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
r8169 0000:06:00.0 enp6s0: renamed from eth0
psmouse serio1: synaptics: queried max coordinates: x [..5590], y [..4508]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
scsi host0: uas
usbcore: registered new interface driver uas
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 505504
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
SSE version of gcm_enc/dec engaged.
scsi 0:0:0:0: Direct-Access Seagate BUP Slim RD 0304 PQ: 0 ANSI: 6
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
scsi host1: ahci
sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd8405000 port 0xd8405100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xd8405000 port 0xd8405180 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd8405000 port 0xd8405300 irq 28
sd 0:0:0:0: [sda] 4096-byte physical blocks
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ums-realtek 2-1.6:1.0: USB Mass Storage device detected
ata1.00: ATA-10: KINGSTON SA400S37120G, SBFKB1E1, max UDMA/133
scsi host6: usb-storage 2-1.6:1.0
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
usbcore: registered new interface driver ums-realtek
ata1.00: configured for UDMA/133
pci 0000:00:00.0: Intel HD Graphics Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 32768K stolen memory
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb0: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] applying lvds SSC disable quirk
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] RC6 disabled, disabling runtime PM support
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: i915drmfb (fb0) is primary device
scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1E1 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7
sd 1:0:0:0: [sdc] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JL61, max UDMA/100
ata2.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A4S JL61 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg3 type 5
ata5: SATA link down (SStatus 0 SControl 300)
raid6: sse2x4 gen() 9368 MB/s
raid6: sse2x4 xor() 6951 MB/s
raid6: sse2x2 gen() 8504 MB/s
raid6: sse2x2 xor() 6443 MB/s
raid6: sse2x1 gen() 7105 MB/s
raid6: sse2x1 xor() 5489 MB/s
raid6: using algorithm sse2x4 gen() 9368 MB/s
raid6: .... xor() 6951 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 13466.000 MB/sec
generic_sse: 11612.000 MB/sec
xor: using function: prefetch64-sse (13466.000 MB/sec)
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Unnecessary job for KINGSTON_SA400S3 5 was removed.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
EXT4-fs (sdc2): re-mounted. Opts: (null)
EXT4-fs (sdc5): re-mounted. Opts: (null)
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Activating swap /swap.img...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Started Journal Service.
Adding 2924540k swap on /swap.img. Priority:-2 extents:6 across:3096572k SSFS
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
uvcvideo: Found UVC 1.00 device J1455 (0603:8612)
uvcvideo 2-1.2:1.0: Entity type for entity Processing 4 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Selector 3 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Camera 1 was not initialized!
input: J1455 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input9
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:37b3)
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
uvcvideo 2-1.3:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 2-1.3:1.0: Entity type for entity Extension 2 was not initialized!
uvcvideo 2-1.3:1.0: Entity type for entity Camera 1 was not initialized!
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 2-1.2: Warning! Unlikely big volume range (=16000), cval->res is probably wrong.
usb 2-1.2: [5] FU [Mic Capture Volume] ch = 1, val = 16000/32000/1
usbcore: registered new interface driver snd-usb-audio
snd_hda_codec_conexant hdaudioC0D1: CX20585: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D1: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D1: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D1: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D1: inputs:
snd_hda_codec_conexant hdaudioC0D1: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D1: Internal Mic=0x1a
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
b43: probe of bcma0:1 failed with error -524
Broadcom 43xx driver loaded [ Features: PNL ]
brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
brcmsmac bcma0:1 wlp5s0b1: renamed from wlan0
alua: device handler registered
emc: device handler registered
rdac: device handler registered
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[399]: Received client request to flush runtime journal.
audit: type=1400 audit(1600885485.492:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=762 comm="apparmor_parser"
audit: type=1400 audit(1600885485.492:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=762 comm="apparmor_parser"
audit: type=1400 audit(1600885485.492:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=758 comm="apparmor_parser"
audit: type=1400 audit(1600885485.492:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=758 comm="apparmor_parser"
audit: type=1400 audit(1600885485.496:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1600885485.496:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1600885485.496:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1600885485.500:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=765 comm="apparmor_parser"
audit: type=1400 audit(1600885485.504:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1600885485.504:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser"
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
RTL8201CP Ethernet r8169-600:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3164 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3969 > 3955), lowering kernel.perf_event_max_sample_rate to 50250
perf: interrupt took too long (4973 > 4961), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6237 > 6216), lowering kernel.perf_event_max_sample_rate to 32000
sbc-bench started
sbc-bench started